Frigidaire PLCS389ECE Manuel page 7

Setting Oven Controls
Setting Bake
Bake
The BAKE pad controls normal baking. The oven can be programmed to bake at any temperature from 170° F to
Cuire
550° F (The sample shown below is for 350°F).
INSTRUCTIONS
To set the Bake Temperature to 350°F
1. Arrange interior oven racks and place food in oven.
Bake
2. Press , "- - -°" will appear and "BAKE" will flash in the
Cuire
display (Figure 1).
3. Press
5
3 0
and "350°" will appear in the display.
START
4. Press . A beep will sound once the oven temperature
DÉPART
reaches 350° F and the display will show "350°" and "BAKE"
(Figure 3).
Clear/Off
Pressing will cancel the Bake feature at any time.
Annuler
To change the Bake Temperature (example:
changing from 350°F to 425°F)
1. After the oven has already been set to bake at 350°F and the
oven temperature needs to be changed to 425°F, press
(Figure 4). "- - -°" will appear and "BAKE" will flash in the
display.
2. Press
5
4
2
and "425°" will appear in the display.
START
3. Press . "BAKE" and "425°" will stay in the display (See
DÉPART
Figure 6).
Note: If the oven was recently heated from prior cooking and has
remained heated, the bake element symbol may not show in the
display immediately.
(continued)
(Figure 2). "BAKE" will continue to flash
(Figure 5). "BAKE" will continue to flash
PRESS
Bake
Cuire
5
3
START
DÉPART
Clear/Off
Annuler
Bake
Bake
Cuire
Cuire
4
2
START
DÉPART
7
DISPLAY
Figure 1
0
Figure 2
Figure 3
Figure 4
Figure 5
5
Figure 6