Frigidaire PLCS389ECE Manuel page 5

Consumer Defined Controls
Setting Temperature Display — Fahrenheit or Celsius:
Broil
The BROIL and CLEAN
Griller
can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display
in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
Clean
2. Press to switch between Fahrenheit or Celsius display
Nettoyer
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
START
3. Press to accept the change or press
DÉPART
change.
(continued)
Clean
pads control the Fahrenheit or Celsius temperature display modes. The oven control
Nettoyer
Clear/Off
to reject the
Annuler
PRESS
Broil
Broil
Griller
Griller
for 7 seconds
Clean
Nettoyer
START
Clear/Off
or
DÉPART
5
DISPLAY
Figure 1
Figure 2
Figure 3
Annuler