Frigidaire PLCS389ECE Manuel page 4

Consumer Defined Controls
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.
Setting Oven Lockout Feature
The Clear/Off pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
Annuler
prevents the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
To activate the Oven Lockout feature
1. Press and hold Clear/Off
Annuler
2. After 3 seconds a beep will sound, "LOC" will appear and
"DOOR LOCKED" will flash in the display (Figure 1). Once the
oven door is locked the "DOOR LOCKED" indicator will stop
flashing.
To reactivate normal oven operation:
1. Press and hold Clear/Off
Annuler
will disappear. The "DOOR LOCKED" will flash in the display
until the oven door has completely unlocked (figure 2).
2. The oven is again fully operational.
Setting Silent Control Operation
Start time
The START TIME
Heure de
départ
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation press
Start time
and hold for 7 seconds. "0:00" will appear and "DELAY"
Heure de
départ
will flash in the display (Figure 3). After 7 seconds ":SP" will
appear in the display (Figure 4).
Clean
2. Press to switch between normal sound operation and
Nettoyer
silent operation mode. The display will show either ":SP" (Figure
4) or ":--" (Figure 5).
If ":SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If ":- -" appears (Figure 5), the control is in
the silent operation mode.
START
3. Press to accept the change or press
DÉPART
change.
for 3 seconds.
for 3 seconds. A beep will sound. "LOC"
Clean
and CLEAN pads control the Silent Control operation feature. The Silent Control operation
Nettoyer
Clear/Off
to reject the
Annuler
4
PRESS
Clear/Off for 3 seconds
Annuler
for 3 seconds
Clear/Off
Annuler
PRESS
Start time
for 7 seconds
Heure
de
départ
Clean
Nettoyer
START
or
Clear/Off
DÉPART
Annuler
DISPLAY
Figure 1
Figure 2
DISPLAY
Figure 3
Figure 4
Figure 5