Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Step 5. Plug in and place
BEFORE OPERATING OR TESTING, follow the grounding
requirements on pages 23 ~ 24 in this manual. Improper connection
WARNING
of the grounding plug can result in a risk of electric shock.
• All gas ranges come with a power cord. The power cord
is connected to the rear of the range. Please review "Electrical
requirements" on pages 23 ~ 24.
• All U.S. and Canadian models are produced with a 3-wire, 120-volt,
60-Hertz electrical system. The entire system, including the power cord,
is preinstalled and prewired at the factory. Altering any part of this system
may result in a short or overload.
1. Plug in the power cord. Make sure the outlet
meets local or national electrical codes as
referenced on pages 23 ~ 24.
2. Slide the range into place.
3. Check the gas supply line to make sure it did
not get damaged and it stayed connected
during positioning.
4. Check to make sure the back leg of the range has slid into the anti-tip
bracket. Carefully tip the range forward to ensure that the anti-tip bracket
engages the back brace and prevents tip-over.
English - 31
Gas Range Plug
Publicité
Table des Matières
