Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION SAFETY
WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death,
obey the following precautions.
•
Have your range installed and properly grounded
by a qualified installer, in accordance with
the installation instructions. Any adjustment and
service should be performed only by qualified gas
range installers or service technicians.
•
Do not attempt to service, modify, or replace
your range or any part of your range unless it
is specifically recommended in this manual. All
other service should be referred to a qualified
technician.
Always use new flexible connectors when installing a gas appliance. Do not use old
•
flexible connectors.
•
Make sure the anti-tip device is properly installed on the range. See the installation
instructions for more information.
•
Due to the size and weight of the range, have two or more people move the range.
•
Remove all tape and packaging materials.
•
Remove all accessories from the cooktop, oven, and/or lower drawer. Grates and
griddles are heavy. Use caution when handling them.
•
Make sure no parts came loose during shipping.
•
Make sure your range is correctly installed and adjusted by a qualified service technician
or installer for the type of gas (natural or LP) you will use. For your range to utilize LP
gas, the installer must replace the 5 surface burner orifices and 2 oven orifices with the
provided LP orifice set, and reverse the GPR adapter. These adjustments must be made
by a qualified service technician in accordance with the manufacturer's instructions and
all codes and requirements of the authority having jurisdiction. The qualified agency
performing this work assumes the gas conversion responsibility.
•
Installation of this range must conform with local codes or, in the absence of local
codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In
Canada, installation must conform with the current Natural Gas Installation Code, CAN/
CGA-B149.1, or the current Propane Installation Code, CAN/CGA-B149.2, and with local
codes where applicable. This range has been design-certified by ETL according to ANSI
Z21.1, latest edition, and Canadian Gas Association according to CAN/CGA-1.1, latest
edition.
English - 11
Publicité
Table des Matières
