Yamaha M2500 Séries Mode D'emploi page 36

3. If you wish to actually recall the selected scene,
press the RECALL switch.
RECALL
The scene whose on/off settings you checked will be
recalled, and the M2500 will automatically return to Nor-
mal mode. If you wish to return to Normal mode without
recalling the scene, press the CHECK switch once again.
Note: If you press a DIRECT RECALL 1–8 switch
while in Check mode, the corresponding scene
memory number 1–8 will be forcibly recalled, and
Check mode will also be cancelled.
Editing and storing the scene you
are checking
In Check mode, you can edit the scene whose on/off set-
tings you are checking with the CHECK indicators, and
then store it once again. This is convenient when you
wish to modify the contents of the scene that you will
recall next, without changing the current on/off settings.
1. In Normal mode, press the CHECK switch to
enter Check mode.
CHECK
2. Use the / switches or the 0–9/ENTER
switches to select the scene memory number
that you wish to edit.
Note: If you use the 0–9 switches, the scene mem-
ory number will not be finalized until you press
the ENTER switch.
1
3
5
7
9
2
4
6
8
0
ENTER
The lit/dark status of the CHECK indicators for each
monaural/stereo input channel, the G1/A7–G8/A14
section, the STEREO section, and the MONO/C sec-
tion will indicate the on/off settings of the selected
scene.
3. Use the ON/EDIT switches of each monaural/
stereo input channel, the G1/A7–G8/A14 sec-
tion, the STEREO section, and the MONO/C
section to edit the on/off settings.
ON/EDIT
In Check mode, pressing an ON/EDIT switch will
switch the lit/dark status of the CHECK indicator.
The actual on/off setting (the setting of the ON indi-
cator) will not be affected.
4. To store the edited on/off settings in the scene
once again, press the STORE switch twice.
STORE
When you press the STORE key the first time, the
MEMORY display will blink "
it is ready to store. If at this point you decide to cancel
without storing, press any key other than STORE.
When you press the STORE key the second time, the
scene will be stored.
5. Press the CHECK key once again to return to
Normal mode.
Instead of pressing the CHECK switch once again,
you can press the RECALL switch to recall the scene
you stored and return to Normal mode.
Note: If a MIDI program change is received while
in Check mode, Check mode will be cancelled.
The Scene Memory function
CHECK
ON
," indicating that
M2500—Owner's Manual
33