Table des Matières
Publicité
6. PROGRAMING OF THE DIFFERENT COFFEE QUANTITIES IN THE CUP
The keys from P1 à P4 can be programmed.
1
Set the machine switch to Position 0.
Keep the key P5 pressed and put again the machine on.
2
Display of Pn then Pc and Pr by pressing several times the key P5
Pc = CALCULATED PROGRAMMING
3
Insert a filter-holder ( with coffee ) into the unit
Install one cup
Display Pc
P5
P1 à P4 Select the dose to be programed (1c for example)
Start the infusion cycle
P5
Press again to stop when the amount of coffee desired is correct.
P5
Display of the corresponding digital value ( from 00 à 99 )
Repeat operation at 3 for the other doses ( 1C for example)
Pn = DIGITAL PROGRAMMING
4
Quick programming without coffee and/or values carried foward on other units.
Display Pn
P5
P1 à P4 Select the dose to be programed
Dispaly of the digital value of the selected dose
P5
Increase the value
P1
Reduce the value
P4
ε
Memorize the new value
P5
Repeat operation at 4 for the other dose
All manuals and user guides at all-guides.com
P1
P2
- 5 -
P5
P4
Publicité
Table des Matières
