Before First Use; Filling With Water - Singer SG2030 Mode D'emploi

All manuals and user guides at all-guides.com
GETTING TO KNOW YOUR IRON
HINTS FOR IRONING
1. Sort out the articles to be ironed according to the type of fabric. This will minimize the
frequency of temperature adjustment for different garments.
2. Test ironing a small area on the backside or inside the garment if you are unsure about the
type of fabric. Start with a low temperature and increase gradually.
3. Wait for about three minutes before ironing heat sensitive fabrics. Temperature adjustment
needs certain time to reach the required level no matter if it is higher or lower.
4. Delicate fabrics such as silk, wool, velour, etc., are best ironed with an ironing cloth to
prevent shine marks.
5. You may have to press a few times to activate the spray and burst of steam functions.

BEFORE FIRST USE

• It is normal for small amount of smoke to be produced during the fi rst use.
• When using the steam function for the fi rst time, do not direct the steam towards the
laundry, as deposits may come out of the steam vents.

FILLING WITH WATER

• Make sure that the plug is disconnected from the socket.
• Make sure that both the steam control knob and the temperature control dial are in the
"OFF" position.
• Hold the iron upright.
• Fill with water through the water fi lling Inlet until it reaches the "MAX" mark indicated on the
side of the iron and never fi ll above this mark.
1. Spray nozzle
2. Water fi lling inlet
3. Steam control knob
4. Spray steam button
5. Burst of steam button
6. Power cable protection
7. Power cable
8. Pilot light
9. Water tank
10. Temperature control dial
11. Temperature selector indicator
12. Max fi lling level
13. Soleplate
14. Measuring cup
3
ENGLISH