Gima ECG90A Notice D'utilisation page 62

9 Screen Calibrate
Click "Calibrate" to call up the dialog box as Fig.13-3-5
Click "Yes" to enter the calibration interface as Fig.13-3-6.
Please operate according to the prompt. If calibration is successful, the prompt "Cal-
ibrate OK!" will appear. If failed, "Calibrate fail, please again"will appear.
13.4 Sample Setting
The interface is shown as Fig.13-4-1.
Function introduction
Sample settings include AC filter, EMG filter, DFT filter and demo mode.
Operating instructions
The operation is same as system setting.
Filter setting can be performed by clicking
All manuals and user guides at all-guides.com
ENGLISH
Fig. 13-3-5
Fig. 13-3-6
Fig. 13-4-1
on the screen.
62