Adjustments; Seat Adjustment Lever; Control Arm Adjustment - Jacobsen G-Plex III Manuel De L'opérateur Et De Sécurité

Les langues disponibles

ADJUSTMENTS

9.1

Pull out on the adjustment lever located under the

left side of the seat. Slide the seat to the desired

position and release the lever (See Fig. 9.1.1).

9.2

Support the control arm to avoid a sudden drop while

adjusting its height. Loosen the Locking Lever to

allow the steering wheel and control arm to be

adjusted up or down. Tighten the locking lever when

steering wheel is at the desired position (See Fig.

9.2.1).

WARNING

DO NOT attempt to adjust the control arm

position while the machine is moving.

The operator may loose control, causing

possible injury to themselves or

bystanders.

All manuals and user guides at all-guides.com

JACOBSEN G-PLEX III Series: DN & DP

SAFETY AND OPERATORS MANUAL

Figure 9.1.1

1. Seat Adjustment Lever

Figure 9.2.1.

1. Control Arm Height Locking Lever.

GB-21

Table des Matières