Collector Simeplano Specifications - Sime NATURAL S 160 Mode D'emploi

COLLECTOR SIME PLANO SPECIFICATIONS
1. Collector frame
of aluminium profile (Al Mg Si 05).
2. Rear cover of aluminium 0.4mm thick, tightly fitted with elastic EPDM seal.
3. Water frame of suitable gauge and thickness: Headers are punched with upper expansion, for perfect manifolds
fitting, thus avoiding pressure drop in the collectors.
Tube pitch = 107mm (EN 1652).
Copper water frame Ø22 headers:
thermoabsorption for the SIME PLANO 182 and SIME PLANO 230 models.
4. Complete area absorber
as the headers, thus increasing the collector's absorbency, Laser Welded to the water frame.
5. High density, eco-friendly thermal insulation
thick layer of prepressed glasswool for the minimization of thermal losses.
Glasswool insulation thermal conductivity: λ=0.032 W/m grd (DIN 56612, measured at 0°C).
6. Tempered solar glass,
adverse weather conditions (e.g. hail storm, extreme temperature changes, etc.). ANSI Z 97-1 (U.S.A.) BS 6206
(G.BRITAIN) DIN 52337 (GERMANY).
All manuals and user guides at all-guides.com
solar collector feed and feed-back.
made of selective aluminium 0.4mm thick, covers the complete window area as well
with a stable coefficient of expansion and high light transmittance, can withstand
Ø8 manifolds:
achieved with a 50mm and 20mm (back and lateral)
ENG
Solar keymark
Certified
solar collector
SIME NATURAL S (vers. LP)
9