Sime NATURAL S 160 Mode D'emploi page 24

6. In case of one
collector model the
collector is going
to be fixed with the
collectors' fixing
washers 8.
7. In case of two collectors model,
place the collector supporting part
7 on bottom part and collectors'
fixing washers 8 without
tightening the M8 screws.
Repeat for the upper part 7.
8. In case of two collectors, first
place the left one, lifting the
collector's upper and lower fixing
washers 8. When the collector is
placed under, we slightly tighten
the M8 screws and nuts with
the collector's fixing washers 8
in order to temporarily restrain
it and easily center it with the
system. Place the mechanically
tightened unions Ø22 at the
collector's edges.
9. Join the second collector and
tighten the union*.
24
SIME NATURAL S (vers. LP)
All manuals and user guides at all-guides.com
8
8
7
8