Sime NATURAL S 160 Mode D'emploi page 20

11. Repeat for the upper part 7.
12. In case of two collectors, first place
the left one, lifting the collector's
upper and lower fixing washers 8.
When the collector is placed under,
we slightly tighten the M8 screws
and nuts with the collector's fixing
washers 8 in order to temporarily
restrain it and easily center it with
the system.
Place the mechanically tightened
unions Ø22 at the collector's edges.
13.
Join the second collector
and tighten the unions*.
14.
Tighten all screws on the base.
Properly orientate the base with the collector.
Firmly attach the base using 4 Upat D10 and bolts (M8x60).
20
SIME NATURAL S (vers. LP)
All manuals and user guides at all-guides.com
N
S
Northern Hemisphere Southern Hemisphere
S
N