Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To re-enable your DVD and AUX Modes, perform the
following steps:
Enabling DVD and AUX Modes
Press and hold the mode key (either DVD or
1.
AUX) until the key blinks twice.
2.
Enter 9 9 9.
The mode key you have selected (either DVD
3.
or AUX) blinks four times.
4.
Repeat steps 1 through 3 above for the other
key you wish to enable (either DVD or AUX).
CLEARING CUSTOM PROGRAMMING
The Star Choice IRC 551 IR and Star Choice URC 551 IR/
UHF Remote Controls contain a Custom Programming
Reset program. You can use either it to remove all
custom programming (including setup codes and
reassigned device keys), or to remove only the Volume
Lock and Channel Lock custom programming.
Removing Volume Lock and Channel Lock
Programming
IMPORTANT: Executing this program erases all custom
settings for Volume Lock and Channel Lock.
However, your device programming remains.
1.
On the remote control, press and hold a device
key (e.g, SAT) until it blinks twice.
Enter 9 8 0. SAT blinks twice to confirm that
2.
all custom programming is cleared.
Removing All Custom Programming
IMPORTANT: Executing this program erases all custom
programming, including setup codes and
reassigned device keys.
1.
On the remote control, press and hold a device
key (e.g, SAT) until it blinks twice.
Enter 9 8 1. SAT blinks twice to confirm that
2.
all custom programming is cleared.
21
Publicité
Chapitres
Table des Matières
