Using The Master Power Key; Clearing The Master Power Key; Re-Assigning Device Keys - Star Choice IRC 551 IR Guide D'utilisation

Using the Master Power Key

1. After programming, point the remote control
at the devices. Press the key for a device (e.g.,
DVD) once.
Press and hold POWER for 1.5 seconds to
2.
sequentially turn the programmed home
entertainment devices on or off.
You see the devices turn on or off according to the
programmed sequence.

Clearing the Master Power Key

1. On the remote control, press and hold a device
key (e.g., DVD) until it blinks twice.
2. Enter 9 9 5. The last-selected device key
blinks twice.
Press and release the MASTER POWER key.
3.

RE-ASSIGNING DEVICE KEYS

The Star Choice IRC 551 IR and Star Choice URC 551 IR/
UHF Remote Controls can be set up to control a second
device of an already-assigned type. For example, to have
the unit control a TV, a Satellite Receiver, and two DVD
players, re-assign the unused AUX key to operate the
second DVD Player as follows:
NOTE: AUX is preset at the factory to control an Pana-
sonic audio amplifier. Performing the steps
below overwrites those settings.
On the remote control, press and hold AUX
1.
until it blinks twice.
2. Enter 9 9 2. AUX blinks twice.
3. Press DVD once, then press AUX once. The AUX
key blinks twice.
The AUX key is now ready to be programmed for your
second DVD player. See "Programming Device Control"
19