Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.
On the System Settings screen, use the
Settings option, then press ENTER. (Applies to
DSR 5xx, 207, 317 receivers.)
7.
On the Installation Settings screen, use the
Control Address option, then press ENTER.
Press and hold the SAT key on your Remote
8.
Control until it flashes.
9.
Using the remote control's number key pad,
enter the dedicated code listed below for each
address:
10.
Press ENTER to confirm the new remote
address and pair it with the satellite receiver.
The Current Address window will now display
the new address.
Note:
An addressed remote control will only work
with the satellite receiver that has the same
remote control address that it is paired with.
PROGRAMMING DEVICE CONTROL
The Star Choice IRC 551 IR and Star Choice URC 551 IR/
UHF Remote Controls are preprogrammed to operate a
Motorola satellite receiver, a Sony TV, a Sony DVD
player, a Panasonic audio amplifier (as an AUX device),
and a Pioneer audio receiver. To control devices other
than the default brands, perform the following steps;
otherwise skip this section.
NOTE:
For TV/VCR Combo control, skip this section
and perform the instructions on "Program-
ming TV/VCR Combo Control" on page 13.
Also refer to "Device Table" on page 8 to find
,
keys to highlight the Installation
,
,
,
ADDRESS 0: Press 00869
•
ADDRESS 1: Press 01870
•
ADDRESS 2: Press 01871
•
ADDRESS 3: Press 01872
•
ADDRESS 4: Press 01873
•
ADDRESS 5: Press 01874
•
ADDRESS 6: Press 01875
•
•
ADDRESS 7: Press 01876
keys to highlight the Remote
11
,
,
Publicité
Chapitres
Table des Matières
