Using The Master Power Key; Programming The Master Power Key - Star Choice IRC 551 IR Guide D'utilisation

1. On the remote control, press and hold a device
key, (e.g., SAT) until it blinks twice.
Enter 9 9 3. SAT blinks twice.
2.
Select a mode (e.g., TV or AUDIO) which you
3.
want to use to control the volume. The
selected device key blinks twice.
Now, when you press VOL+, VOL-,or MUTE, the volume of
the selected device (e.g., TV) is controlled regardless of
mode.

USING THE MASTER POWER KEY

The Star Choice IRC 551 IR and Star Choice URC 551 IR/
UHF Remote Controls have a unique feature that allows
you to sequentially turn up to five of your home
entertainment devices on or off with a single key press.
NOTE: The MASTER POWER (POWER) default setting
is the SAT mode. If it is not programmed, only
the satellite receiver and television turn on or
off. In any other mode, pressing MASTER
POWER (POWER) once turns the selected
device on or off.

Programming the Master Power Key

1. On the remote control, press and hold a device
key (e.g., DVD) until it blinks twice.
Enter 9 9 5. DVD blinks twice.
2.
3. Press POWER once.
4. For the first device you want in the power on
sequence, press a device key (e.g., AUDIO)
once. Then press POWER once.
5. Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
18