Programming Channel Control Lock - Star Choice IRC 551 IR Guide D'utilisation

For example, to find out which code is operating your TV:
1. On the remote control, press and hold TV until
it blinks twice.
Enter 9 9 0. The TV key blinks twice.
2.
3. To view the code for the first digit, press 1
once. Count the number of times the TV key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page 13.
NOTE: If a code digit is 0, the selected mode key does
not blink.
4. Repeat step 3 five more times for the
remaining digits. Use 2 for the second digit, 3
for the third digit, 4 for the fourth digit. and 5
for the fifth digit. Finish writing down the
code in the TV Code boxes on page 13.
5. To check for other device codes, repeat steps 1
through 4, but substitute the appropriate key
(e.g., AUX, DVD, AUD, or SAT) for the device
you are checking. Write down the codes in the
appropriate boxes on page 13.

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control's channel-control
capabilities are locked to the satellite receiver. The
affected keys
LAST. This guarantees that you do not inadvertently
change a channel on your TV or VCR. However, you can
de-activate this feature to allow full access to these keys
in the TV and VCR modes.
*
NOTE: This feature does not affect the AUDIO mode.
*
are 1 through 0, CH+, CH-, ENTER, and
15