on page 11. To re-assign other device keys, repeat these
and substitute the key sequence using the following
chart:
NOTE:
Only one device can be assigned to an unused
device key at a time.
To Re-Assign
AUX as 2nd
AUDIO key
AUX as 2nd
TV key
AUX as 2nd
SAT key
AUX back to
AUX
To re-assign another unused device key, substitute it for
the AUX key above and then perform the sequence. For
example, to re-assign an unused AUDIO key as a second
DVD key, perform AUDIO 9 9 2 DVD AUDIO.
When a re-assignment is done, the selected device key
(e.g., AUDIO) blinks twice to confirm your choice. At that
time, you need to program device control (see
"Programming Device Control" on page 11).
DISABLING DVD AND AUX MODES
If you do not have a DVD player or auxiliary device (such
as an audio amplifier) connected to your home
entertainment system, you may want to disable the DVD
and AUX modes. To disable DVD and AUX modes,
perform the following steps:
Disabling DVD and AUX Modes
1.
Press and hold the mode key (either DVD or
AUX) until the key blinks twice.
2.
Enter 9 9 9.
The mode key you have selected (either DVD
3.
or AUX) blinks twice.
4.
Repeat steps 1 through 3 above for the other
key you wish to disable (either DVD or AUX).
Note:
A disabled DVD or AUX key does not blink
when you press it. The disabled key does not
send a code when MASTER POWER is acti-
vated.
Perform Key Sequence
AUX 9 9 2 AUDIO AUX
AUX 9 9 2 TV AUX
AUX 9 9 2 SAT AUX
AUX 9 9 2 AUX AUX
20