Unlocking Channel Control; Locking Channel Control To Sat; Changing Volume Lock - Star Choice IRC 551 IR Guide D'utilisation

Unlocking Channel Control

1. On the remote control, press and hold SAT
until it blinks twice.
Enter 9 7 3. The SAT key blinks twice.
2.
3. Press CH- once. The SAT key blinks four times.
Now the remote control provides TV and VCR channel-
control capabilities while in the TV or VCR mode.

Locking Channel Control to SAT

On the remote control, press and hold SAT
1.
until it blinks twice.
Enter 9 7 3.The SAT key blinks twice.
2.
3. Press CH+ once. The SAT key blinks twice.
Now, regardless of what mode you select (except AUDIO),
the channel keys only change channels on your satellite
receiver.

CHANGING VOLUME LOCK

Volume Lock allows you to control the volume through
the device identified as having your primary speaker(s),
regardless of which mode you are using. On the Star
Choice IRC 551 IR and Star Choice URC 551 IR/UHF
Remote Controls, Global Volume Lock is set to TV, so you
can control TV volume while in the AUX, DVD, TV or SAT
mode. You can perform Individual Volume Unlock on a
selected device to set its volume control for independent
operation.
NOTE: The audio mode's (AUDIO) volume controls
are active regardless of Volume Lock settings.
However, if you lock the volume controls to
the AUDIO mode, you have control of the audio
device's volume in all other modes (i.e., AUX,
DVD, TV, and SAT). This can be an advantage if,
for example, you always listen to home enter-
16