Panasonic WX-SE200DNP Mode D'emploi page 36

Important
How to use
● Pairing confirmation is possible for the channels communicating with
microphone (the channel on which the [RF LEVEL] indicator has at least one
line lit). Pressing the [REG] button on a channel with no microphones
communication will do nothing.
● The pairing confirmation can also be performed from the microphone.
The microphone audio will keep on transmitting during pairing confirmation.
Also refer to the microphone manual.
● When the [REG] indicator on the extension receiver blinks red during pairing
confirmation mode, there is no microphone paired with that channel.
Perform the steps described in "Pairing" (page 28).
36
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb 36 2022/04/27 13:19:25