Confirm The Paired Microphones - Panasonic WX-SE200DNP Mode D'emploi

■ Confirm the paired microphones

1
Set the extension receiver to pairing confirmation mode
Make sure that the [POWER] indicator on the receiver with this product connected and
the [POWER] and [STATUS] indicators on this product are lit green, shortly press the
[REG] button once on a channel which you choose to check among from the channels
communicating with microphones. Then the extension receiver enters the pairing
confirmation mode (the [REG] indicator turns green and orange alternately for five
seconds).
Power indicator
This product
2
Check the [PWR] indicator on the microphone
While the extension receiver is in pairing confirmation mode, the [PWR] indicators of
the powered-on microphones paired with the channel which is in pairing confirmation
mode will turn green and orange alternately. This allows to confirm the channel/
microphone pairings.
The pairing confirmation mode lasts for five seconds on both the microphone and the
extension receiver, after which both will go back to their normal operation mode.
WX-ST200P
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb
Status indicator Register indicator
Register button
WX-ST400P
Power
indicator
35
Power indicator
35
2022/04/27 13:19:25