Panasonic WX-SE200DNP Mode D'emploi page 27

● The extension receiver input connector of this product is a proprietary
type.
Important
Do not connect any PoE devices (hubs or routers equipped with PoE).
Important
Doing so may cause malfunctions.
● Be sure to use a straight (non-crossover) LAN cable to connect between
the receiver and the extension receiver. Connecting with a crossover
LAN cable may cause the extension receiver to malfunction.
● Use a LAN cable no longer than 0.5 m (1.6 ft) for the connection between
the receiver and the extension receiver.
● When outputting audio from the microphones of each channel of this product
to the Dante network, connect the Dante Network connector of this product
to the Dante network.
● The audio of all channels can be mixed by using a connection between the
receiver and the extension receiver by connecting the [MIX OUT] connector
to the [AUDIO IN] connector of this product.
● When connecting the mixed output of the audio of each channel and audio
of the [AUDIO IN] connector to an amplifier (or mixer), use the [MIX OUT]
connectors.
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb 27
27
2022/04/27 13:19:23