Panasonic WX-SE200DNP Mode D'emploi page 13

When turning the power switch to ON or OFF
● All connected peripheral devices and power amplifiers have to be turned OFF before the
power switch operation. Failing to do so may cause a clicking noise which could
potentially damage the speakers or other peripheral devices.
When not using for an extended period of time
● Turn the power switch to OFF and remove the power plug from the electric outlet.
Condensation
● Be careful of condensation, as it may cause malfunctions.
Condensation is likely to happen in the following scenarios:
• High humidity
• Moving from a cold place to a hot or humid one
● If condensation does happen, wait for one to two hours and make sure that all
condensation is gone before turning ON the equipment.
Maintenance
● Perform it after having turned OFF the product. It may lead to injury.
● Clean the product with a dry, soft cloth.
● Do not use volatile chemicals such as paint thinner or benzine.
● When using chemically treated cloths, carefully read the included instructions.
● When the product is particularly dusty, use a vacuum cleaner etc. to clean it.
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb 13
13
2022/04/27 13:19:20