Panasonic WX-SE200DNP Mode D'emploi page 15

6 V olume adjustment knob [VOL 0, 10]
Adjusts the volume of the microphone on the respective channel.
7 M icrophone battery indicator [MIC BATT]
Changes color (green/orange/red) depending on the residual battery level of the
microphones on each channel. See "Confirm the remaining battery level of the
microphone" (page 34) for details.
8 P airing button
This button controls the pairing between microphones and each channel on the
extension receiver.
● Pairing: Keep the [REG] button pressed for more than two seconds to enter pairing
mode. (page 28)
Exit pairing mode by shortly pressing the [REG] button once while in pairing
mode.
A channel cannot enter pairing mode when the microphones paired to that
channel are currently active.
● Pairing confirmation:
Shortly press the [REG] button to enter pairing confirmation mode.
(page 35)
Exit pairing confirmation mode by shortly pressing the [REG] button once
more.
9 P airing indicator [REG]
Shows the current operation mode (pairing, pairing confirmation) of the channel.
Off:
Blinking (orange):
On (green) (1 second): Pairing successful
Alternately blinking (orange/green):
Rear
j
j E xtension receiver connector [RCVR IN]
Connect the receiver (EXT OUT) and the extension receiver (RCVR IN) with a LAN
cable.
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb
Standard mode
Pairing mode
Pairing confirmation
k
m n m n o p
15
l
q r
15
2022/04/27 13:19:20