Wired Pairing - Panasonic WX-SE200DNP Mode D'emploi

Pairing

■ Wired pairing

Pair a microphone to the receiver via a wired connection.
The wired connection uses a conversion cable (micro type B male to type A female; locally
procured) and a USB 2.0 cable (type A male to micro type B male; locally procured).
* Use a USB host (OTG) cable as conversion cable.
1
Remove the battery cover of the microphone
Refer to the microphone manual for further details.
2
Connect the microphone to the receiver with this product connected
Connect the [SET] connector on the receiver with this product connected and the
[SET] connector on the microphone with a conversion cable (micro type B male to type
A female; locally procured) and a USB 2.0 cable (type A male to micro type B male;
locally procured).
When connecting the cables, make sure that the conversion cable is attached to the
receiver. If you connect the cables otherwise, you will not be able to pair the
microphone.
Refer to the receiver manual for the detailed connection procedure.
3
Set the power switch on the microphone to ON
If the microphone is currently OFF, turn the power switch to ON. When the microphone
and the extension receiver are connected via cable, the microphone stops transmitting
audio.
30
PUQX1040ZAV1_WX-SE200DNP_OI_en-fr.indb
WX-ST200P
Power indicator
Power switch
30
WX-ST400P
Power switch
2022/04/27 13:19:24