English
Our guarantee is applicable for twelve months after the date on which the
equipment is made available (extract from our General Conditions of Sale,
available on request).
For maintenance, use only specified spare parts. The manufacturer will not
be held responsible for any accident occuring following a repair done other
than by its After Sales Service or approved repairers.
7.1
MAINTENANCE
7.1.1
Battery replacement
•
As battery power is not sufficient,
LCD will display "
with one new battery type 9V is
required.
•
Open battery cover, then take out
the battery from instrument and
replace with a new 9-Volt battery
•
Place the battery cover back.
7.2 WORKING TEST
To check the good working order of thermometer, aim it towards water containing
ice cubes, a simple 0°C (32°F) reference.
7.3 CLEANING THE MEASUREMENT LENS
•
Remove dust with a clean pear-shaped dust removing syringe
•
Carefully remove remaining particles using a clean and soft cloth.
•
Delicately clean the lens using a damp cloth and leave to dry in air.
Do not use solvent
6.
WARRANTY
7.
MAINTENANCE
" replacement
Page 28
C.A 1864 – C.A 1866