Error Messages - Chauvin Arnoux C.A 1864 Notice De Fonctionnement

English
(1) C/F
Select the temperature units (
switch
(2) LOCK ON / OFF
To lock the unit on for continuous measurement, slide
the middle switch LOCK ON/OFF right. If the trigger is
pulled while the unit is lock on, the laser and backlight
will turn on if they have been activated. When the unit
is locked on, the backlight and laser will remain on
unless it is turned off using the Laser/Backlight button
on the keypad.
(3) SET ALARM
To activate the alarms, please slide the bottom switch
SET ALARM right.
To set values for the High Alarm (HAL), Low Alarm
(LAL), firstly active the display by pulling the trigger or
press MODE, then press MODE until the appropriate
code appears in the lower left corner of the display,
press the UP and down buttons to adjust the desired
values.
4.5

ERROR MESSAGES

HOLD
AVG
Exceeding of the maximum
value measurable
The maximum measurable
value is 1000°C / 1832 °F,
which if exceeded causes the
instrument to display the
screen shown opposite.
o
C or
ε = 0,9
°C
OL
225.2
o o o
F) using the C/
HOLD
AVG
Exceeding of the minimum
value measurable
The minimum measurable
value is -50°C / -58 °F, which
if exceeded causes the
instrument to display the
screen shown opposite.
Page 26
C.A 1864 – C.A 1866
F
ε = 0,9
°C
- OL
225.2