Dust Extraction - Skil 7510 Consignes De Fonctionnement/Sécurité

SM 2610019941 08-11:SM 2610019941 08-11.qxp 8/15/11 9:07 AM Page 9
FIG. 3

DUST ExTRACTION

Your tool is equipped with a dust port for dust
extraction. To use this feature, insert
FIG. 4
TRIGGER SWITCH AND "LOCK-ON"
Your tool can be turned "ON" or "OFF" by
squeezing or releasing the trigger. Your tool is
also equipped with "Lock-ON" button located
just above the trigger that allows continuous
operation without holding the trigger (Fig. 5).
TO LOCK SWITCH "ON": Squeeze trigger,
depress button and release trigger.
TO UNLOCK THE SWITCH: Squeeze trigger
and release it without depressing the "Lock-
ON" button.
If the "Lock-ON" button is
WARNING
continuously
pressed, the trigger cannot be released.
Operating Instructions
BUTTON
being
TAB
DUST PORT
standard 1-1/4" vacuum hose into the dust
port, and connect the opposite end of the
hose to a shop vacuum cleaner (Fig. 4).
DUST PORT
FIG. 5
"LOCK-ON"
BUTTON
de-
-9-
MICROFILTER
DUST CANISTER
"
STANDARD 1-1/4
VACUUM HOSE
ON/OFF
TRIGGER