Introduction Of Advanced Multi-Cd Player Operation - Pioneer SUPER TUNER III D DVH-P5000MP Mode D'emploi

Multi-CD Player
Introduction of advanced
multi-CD player operation
1
1 Function display
Shows the function status.
2 RPT indicator
Shows when repeat range is selected to cur-
rent track.
% Press F to display the function names.
Press F repeatedly to switch between the fol-
lowing functions:
RPT (repeat play)LIST (disc title list)RDM
(random play)SCAN (scan play)ITS-P (ITS
play)PAUSE (pause)COMP (compression
and DBE)
# To return to the playback display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: MCD (multi-CD player re-
peat), TRK (one-track repeat) and DSC (disc re-
peat).
1 Press F to select RPT.
Press F until RPT appears in the display.
2
range.
Press m or n until the desired repeat
range appears in the display.
2
! If you select other discs during repeat play,
! If you perform track search or fast forward/re-
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range, MCD
and DSC.
1
Refer to Repeating play on this page.
2
Press F until RDM appears in the display.
3
RDM :ON appears in the display. Tracks will
play in a random order within the previously
selected MCD or DSC ranges.
4
RDM :OFF appears in the display. Tracks will
continue to play in order.
If you turn random play on during DSC and then
return to the playback display, DRDM appears in
the display.
Press m or n to select the repeat
! MCD  Repeat all discs in the multi-CD
player
! TRK  Repeat just the current track
! DSC  Repeat the current disc
Notes
the repeat play range changes to MCD.
verse during TRK, the repeat play range
changes to DSC.
Select the repeat range.
Press F to select RDM.
Press r to turn random play on.
Press q to turn random play off.
Note
Section
10
49
En