Connect The Headset; Eject The Memory Card; Attach The Wrist Strap - Nokia E Serie Mode D'emploi

2. Insert the memory card in the slot with the contact area
first. Make sure that the contact area is facing the
connectors on the device.
3. Push the card in until it locks into place.
4. Close the back cover.

Eject the memory card

Important: Do not remove the memory card during an
operation when the card is being accessed. Doing so may
damage the memory card and the device, and corrupt data
stored on the card.
1. Press the power key briefly, and select
card.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from the
memory card slot.
4. Close the back cover.
14
Cyan Cyan

Connect the headset

Warning: When you use the headset, your ability to hear
outside sounds may be affected. Do not use the headset
where it can endanger your safety.
Connect the compatible headset to the headset connector of
your device.

Attach the wrist strap

Thread the wrist strap as shown, and tighten
it.
Remove memory
Antennas
Your device may have internal and external antennas. Avoid
touching the antenna area unnecessarily while the antenna
is transmitting or receiving. Contact with antennas affects the
communication quality and may cause a higher power level
during operation and may reduce the battery life.
Magenta Magenta Yellow Yellow Black Black
www.nokia.com/support