Preparation Before Operation - Mitsubishi Electric Mr.SLIM MSY-A24NA Notice D'utilisation

P
REPARATION BEFORE OPERATION
Before operation: Insert the power supply plug into the power outlet and/or
turn the breaker on.
Installing the remote controller batteries
1.
Remove the front lid
3.
Install the front lid
• Make sure the polarity of the batteries is correct.
• Do not use manganese batteries. The remote controller could malfunction.
• Do not use rechargeable batteries.
• Replace all batteries with new ones of the same type.
• Batteries can be used for approximately 1 year. However, batteries with
expired shelf lives last shorter.
Setting current time
1.
Press RESET
2.
Press CLOCK
4.
Press CLOCK again
• Press RESET and CLOCK gently using a thin stick.
If the RESET button is not pressed, the remote
controller may not operate correctly.
Changing temperature units (°F/°C)
The preset unit is °F.
1.
Press RESET while
the temperature but-
tons are pressed.
• Press RESET gently using a thin stick.
All manuals and user guides at all-guides.com
2.
Insert AAA
alkaline batteries
3.
Press the TIME buttons to set the
time
Each press increases/decreases
time by 1 minute (10 minutes
when pressed longer)
En-4