Zippers And Piping - Singer Smart II Manuel D'instruction

All manuals and user guides at all-guides.com
GB

Zippers and piping

Set the machine as illustrated.
Dial selector on " ".
Change to zipper foot. (1)
Set stitch length control between "1" - "4" (according to thickness
of fabric).
The zipper foot can be attached right or left, depending on
which side of the foot you are going to sew. (2)
To sew past the zipper tab, lower the needle into the fabric,
raise the presser foot and push the zipper tab behind the
presser foot. Lower the foot and continue to sew.
1
It is also possible to sew a length of cord into a bias strip to
form a "welt" or piping. (3)
2 3
50