Pairing With A Bluetooth Device - ION AquaSport Max Guide D'utilisation

Pairing with a Bluetooth Device

1. Turn on your Bluetooth device.
2. Power on AquaSport
Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is
slowly flashing.
3. Navigate to your Bluetooth device's setup screen, find "AquaSport
Note: Do not connect to iSP161_BLE; this is reserved exclusively for connecting to the
™
ION Sound XP
on your Bluetooth device and try to connect again.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4. Press and hold the Bluetooth button to disconnect a paired Bluetooth device.
5. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 5.0.
Linking Two AquaSport
1. Be sure to disconnect Bluetooth devices before attempting to pair speakers using Stereo-
TM
Link . Press and hold the Bluetooth button to do this.
2. Double-press the Bluetooth button on each AquaSport Max
will begin to rapidly flash blue to indicate they are attempting to link. Please allow 10 to 30
seconds for the speakers to link.
Note: Speakers should be within 50' (15 m) of each other to properly link. The closer the
speakers are, the faster they will link.
Note: To exit Stereo-Link
3. When the two speakers are linked, the secondary speaker's Bluetooth LED will be lit solid
green, while the primary speaker's Bluetooth LED will blink blue slowly to indicate it's
ready to pair the stereo-linked speakers to your Bluetooth device.
4. Navigate to your device's Bluetooth settings menu and select AquaSport Max to connect.
5. To exit Stereo-Link
speakers.
Note: If a speaker is in Stereo-Link mode when you power it off, it will be in Stereo-Link mode
the next time you power it on (they will automatically link when you power them on as long as
they are in close range of each other and powered on within 15 seconds of each other).
Bluetooth Call Answering
Note: You must power on and pair AquaSport
to listen to music or as a speakerphone.
To reject an incoming call, Press and hold the Play/Pause button for two seconds.
To answer an incoming call, press the Play/Pause button and then quickly release it.
During a call, press the +/- buttons to adjust the volume of the caller.
When you wish to end a call, press the Play/Pause button. Bluetooth audio will resume
playing at this time.
™
Max and it will automatically go into pairing mode to search for
app. If you experience trouble in connecting, select "Forget this Device"
™
Max Speakers
™
mode, double-press the Bluetooth button again.
™
mode, double-press the Bluetooth button on one of the two
™
™
Max with your Bluetooth device before using it
6
™
Max" and connect.
speaker. The Bluetooth LEDs