Pairing A Bluetooth Device - ION Raptor Guide D'utilisation Rapide

Pairing a Bluetooth Device

1. Turn on your Bluetooth device.
2. Power on Raptor. If you have previously connected to another Bluetooth device, Raptor
will reconnect. To disconnect pairing if the Bluetooth icon is lit solid, press and release the
Bluetooth button.
3. Navigate to your Bluetooth device's setup screen, find "Raptor" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4. To disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth
button.
5. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Raptor:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one-time step).
3. Power on Raptor.
4. Touch and briefly hold your device to the NFC logo.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
"0000".
6. To unpair, gently bump your device against the NFC logo located on Raptor's top panel.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source, musical
instrument, or microphone. Also, try to reduce the overall volume of Raptor using the Master
Volume knob.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is a high-pitched whistling noise when using microphones: This is probably
feedback. Point the microphone away from the speaker.
If there is poor AM reception: To adjust AM reception, move entire unit.
If you can't hear the microphone over the music volume: Turn down the music volume
from your source.
If you can't play music from a flash drive: The USB port is only for charging USB devices.
7