Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LIFTSYSTEME
KASSETTENLIFT K90
8
ASSEMBLY
General notes
8.1
The following steps must be taken before starting assembly:
-
Check that the machine parts to be assembled are complete with the help of
the shipping notes and assembly plans.
-
Visually inspect the machine parts for any damage.
-
Check that the place of assembly has a sufficient carrying capacity and spatial
assembly possibilities.
-
Clarify what measures have to be taken in emergency situations, such as accidents or
fires, etc. with a member of staff.
-
Only qualified personal have to connecting up the lift.
CAUTION:
Wear safety and protective clothing when carrying out assembly work
and only use safety devices in perfect working order. The relevant safety
instructions have to be observed.
The delivered door contact switch have to be installed (see Electricdiagram)!
Staff qualifications
8.2
Only trained members of staff or staff under the instruction of a qualified person may
assemble the lift.
We do not assume any liability for any damage resulting from improper assembly.
Notes on safety regulations, warning of danger
8.3
When carrying out assembly work always wear safety and protective clothing. Only safety
devices which are in perfect working order may be used. The relevant safety instructions
must be observed.
All manuals and user guides at all-guides.com
Publicité
Table des Matières
