LENCO L-80 USB Mode D'emploi page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

All manuals and user guides at all-guides.com
11. MOTOR OFF/Reverse BUTTON
Tap the button to switch Reverse/Forward playback.
Press the button more than 1sec. to enable motor off, and the led will be flash. Press the button more
than 1sec again to disable motor off.
12. 45 RPM ADAPTOR
Place on center spindle for playing 7" records with large center holes.
13. TONEARM LEVER
Controls the up and down action of the tone arm lift.
14. ANTI-SKATE KNOB
When a record is playing, a force is generated drawing the stylus towards the center of the record. This
control compensates for that force and needs to be set to the same value as the counterweight
pressure ring.
15. COUNTERWEIGHT
Use the counterweight to balance the tone arm and to adjust the stylus pressure.
16. PHONO/LINE OUTPUT
Connect the turntable to any phono or line level input, using the supplied cinch/cinch cable. Be sure to
put the phono/line switch in the right position.
17. AC VOLTAGE SELECTOR
Make sure the selector is set properly.
18. POWER SWITCH
This switch turns the power on or off.
19. POWER CORD CONNECTOR
Used to connect the included power cord.

Publicité

Table des Matières
loading

Table des Matières