Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
1
19
3
For pool with 32mm(1.25in) valve
P6916
STOP
Before switching on, please read the manual carefully.
RCD Test
A. Insert the plug into the power outlet.
B. Press the "RESET" button; the indicator
light turns red.
NOTE: If the indicator light is not on, the
test has failed.
C. Press the "T" button; the indicator light
turns off.
NOTE: If the indicator light is not off, the test has failed.
D. Press the "RESET" button, the indicator light turns red, and the sand filter is ready for use.
WARNING: RISK OF ELECTRIC SHOCK. The RCD plug must be tested before each use.
WARNING: Do not use the sand filter if this test fails. Please contact your local Bestway Aftersales Service.
WARNING: Insert the RCD plug into a residual current device (RCD) having a rated residual operating
not exceeding 30mA.
WARNING: Before inserting plug into a power outlet, make sure the current rate of the power outlet is
suitable for the sand filter.
OPERATION
CONTROL VALVE OVERVIEW
WARNING: To prevent equipment damage and possible injury,
always switch off sand filter before changing the Control Valve function.
Changing valve positions while the pump is running can damage the
Control Valve, which may cause personal injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle and rotate to desired function.
CONTROL VALVE FUNCTIONS
The Control valve is used to select 6 different filter functions: Filter,
Closed, Backwash, Rinse, Drain and Circulate.
S-S-005011/21.0x28.5cm/58404GS / 1500gal 德规砂滤器说明书/JS-YF-2016-B-08880-英
2
D
Garden hose (not included)
For Drain, Backwash,
Rinse function
B
A
P61318
P61322
6
A
D
A
B
B
C
D
S-S-005011
Publicité
Table des Matières
