PIEPS PRO BT Instructions page 4

1. INTRODUCTION
Thank you for purchasing a PIEPS PRO BT/POWDER BT!
The PIEPS PRO BT/POWDER BT is an easy to use avalanche transceiver with reliable high performance. Naturally,
the PIEPS PRO BT/POWDER BT comes with all tried and tested PIEPS features:
•
3 antenna technology
•
Big, circular receiving range for a quick and stable signal detection
•
Perfect signal processing, even in difficult situations (multiple burials)
•
Mark function
•
Comprehensive self-check
•
Easy to use group check
•
Automatic interference protection
•
Auto search-to-send
•
iPROBE support
•
Device management via PIEPS APP
The PIEPS PRO BT provides additional functionality for maximum support in professional use:
•
SCAN function
•
Analog mode
•
Victim selection
•
Group check pro-mode
An avalanche beacon does not protect against avalanches! Detailed knowledge of avalanche prevention is as
indispensable as regularly practicing victim searches in an emergency. The following procedures and tips relate
only to special usage in conjunction with the PIEPS PRO BT/POWDER BT. The basic line of action in an emergency
– as explained in specialist publications and material from avalanche courses – must be followed.
With the PIEPS PRO BT/POWDER BT you have a product that is state of the art in terms of safety and user-
friendliness. Despite this, the PIEPS PRO BT/POWDER BT can pose risks if used inappropriately or incorrectly. We
refer to possible hazards in chapter 2 and with safety notes placed throughout the operating manual.
This operating manual is intended to ensure the safe use of the PIEPS PRO BT/POWDER BT. The safety instructions
in this document must be followed at all times.
Before you use the PIEPS PRO BT/POWDER BT, you must have read and understand this operating manual
Pieps GmbH is not liable for technical or printing errors in this operating manual, neither is any liability accepted
for damage caused directly or indirectly by the delivery, performance or use of this operating manual.
©
Copyright Pieps GmbH, 08/2018
This translation of the original manual is protected by copyright. All rights, especially the rights of reproduction,
distribution and translation, are reserved. No part of this document may be reproduced or stored, processed,
duplicated or distributed using electronic systems in any form (photocopy, microfilm or other method) without
the written consent of Pieps GmbH. Violations may incur criminal penalties.
Manual PIEPS PRO BT/POWDER BT | Firmware v1.0 | 08/2018
.
3 / 22