Error Description; Battery Replacement - PIEPS PRO BT Instructions

6. TROUBLESHOOTING, MAINTENANCE, STORAGE, DISPOSAL
6.1 TROUBLESHOOTING

Error Description

No indication on the display
E0 High current
This error disappears after the self-check.
E1 System configuration
This error remains on the display.
The device is not serviceable.
E2 Transmitter or receiver or amplifier
E3 The error disappears after the self-check.
E4 The device has limited functionality in send or
search mode.
E5 Processor
This error remains on the display.
The device is not serviceable.
E6 Distance and/or direction indicator
This error disappears after the self-check.
The device has limited functionality regarding
the distance and/or direction indication.
E8 Accelerometer
This error disappears after the self-check.
The device has limited functionality: Auto-
Search-to-Send is not possible.
Group check pro-mode is not possible.
E9 Bluetooth
Bluetooth activation and/or connection not
possible. The avalanche beacon function is
working.
Is not checked during the self-check, occurs only
during Bluetooth activation.

6.2 BATTERY REPLACEMENT

Change the batteries as soon as the battery capacity indication (2D) shows an empty battery. Always change all
three batteries at once! To do so, open the battery compartment (1H) and be sure to insert the new batteries the
right way around. For battery disposal, follow the applicable regulations in your country.
DANGER Risk of explosion from incorrectly used batteries
Risk of incorrect battery capacity indication
Only use batteries of type "Alkaline (AAA) LR03 1.5 V" or "Lithium (AAA) FR03 1.5V"!
The use of Lithium batteries must be confirmed in the PIEPS APP!
Manual PIEPS PRO BT/POWDER BT | Firmware v1.0 | 08/2018
Measure
Check the device for physical damage. Check the
battery capacity, type and polarity (+,-). Replace the
batteries. Take the device to your retailer.
Take the device to your retailer.
Take the device to your retailer.
Repeat the self-check in an area free from
interference (outdoors) and check for electronic,
magnetic and metallic sources of interference. In case
of a permanent error take the device to your retailer.
Take the device to your retailer.
Take the device to your retailer.
Take the device to your retailer.
Retry to activate the Bluetooth mode.
In case of a permanent error take the device to your
retailer.
20 / 22