PIEPS PRO BT Instructions page 22

Battery lifetime
PIEPS PRO BT
PIEPS POWDER BT
3/3 full
2/3 full
1/3 full
empty
empty, blinking
6.3 CLEANING
Use a damp cloth without cleaning agent to clean the device.
NOTICE Flowing water, steam or cleaning agent must not be used to
clean the device. To do so could impede operation of the device.
6.4 STORAGE
Store the device in a dry room at room temperature.
NOTICE If the device is not used for extended periods of time (summer months),
it is recommended to remove the batteries from the battery
compartment. The warranty does not cover damage caused by leaking
batteries.
CAUTION Risk of device malfunction or damage due to extreme temperatures
Do not expose the device to extreme temperatures outside the operating limits!
Store the device protected from direct sunlight! Extreme temperatures can result
in malfunction or damage!
6.5 DISPOSAL
NOTICE Please note that the device is an electronic device. It cannot therefore be disposed
by public waste management companies. Dispose of the device in accordance
with the law in your country.
7. CONFORMITY
EUROPE
Hereby, Pieps GmbH declares that the radio equipment type PIEPS PRO BT/POWDER BT is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address: www.pieps.com/conformity
Manual PIEPS PRO BT/POWDER BT | Firmware v1.0 | 08/2018
Alkaline
400 h SEND
200 h SEND
100% - 66% h SEND
66% - 33% h SEND
33% - 20 h
20 h SEND (+10° C, 50° F) + 1 h SEARCH (-10° C, 14° F)
Final reserve, device can shut down at any time
Lithium
600 h SEND
300 h SEND
✓
✓
✓
21 / 22