Using The Cooler - Waeco BordBar AS-25 Notice D'utilisation

_AS-25.book Seite 17 Mittwoch, 4. Juni 2008 11:24 11
5.2

Using the cooler

a
Caution!
Lift the cooler by the handle, not by the shoulder strap.
Otherwise you risk spillage.
I
Note
If the handle is folded back of if the cooler is being carried, the lid
is locked. You can only open the lid when the handle is folded for-
wards.
I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (2 1, page 3) into the cigarette light-
er socket or a 12 V socket in the vehicle
or
➤ Plug the 220-240 V connection cable (2 2, page 3) into the AC voltage
socket and connect it to the 220-240 V AC mains supply.
I
Note
Close the box tightly by pushing down the lid.
✓ The cooler starts cooling the interior.
a
Caution!
Ensure that the objects placed in the cooler are suitable for cooling
to the selected temperature.
➤ To switch off the cooler, disconnect the plug.
5.3 Connecting to a cigarette lighter
I
Note
If you connect the device to the cigarette lighter of your vehicle, re-
member that the ignition must be turned on to supply the device
with power.
All manuals and user guides at all-guides.com
Operation
17