Using The Cooler; Cleaning And Maintenance - Waeco BordBar TF-14 Notice D'emploi

_TF-14.book Seite 15 Mittwoch, 12. Dezember 2007 9:58 09
BordBar TF-14
Do not leave the lid open for longer than necessary.
Clean the lid seal regularly.
6.2

Using the cooler

Note
I
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
Place the cooler on a firm base.
Connect the 12 V connection cable into the cigarette lighter socket or a
12 V socket in the vehicle
The cooler starts cooling the interior.
Caution!
a
Ensure that the objects placed in the cooler are suitable for cooling
to the selected temperature.
To switch off the cooler, disconnect the plug.
6.3 Connecting to a cigarette lighter
Note
I
If you connect the device to the cigarette lighter of your vehicle, re-
member that the ignition must be turned on to supply the device
with power.
7

Cleaning and maintenance

Caution!
e
Before cleaning the cooler, disconnect the plug from the socket or
cigarette lighter.
Caution!
a
Do not clean the cooler under running water or in dishwater.
Caution!
a
Do not use abrasive cleaning agents or hard objects during clean-
ing as these can damage the cooler.
Occasionally clean the device interior and exterior with a damp cloth.
Cleaning and maintenance
15