Publicité
Thank you for purchasing this product. Please read user guide for safety and operations information before using
the product. Keep this manual for future reference. This product can create perfect laser programs and effects
since it has passed a series of strictly tests before delivery. Please check the attachments listed on the page after
opening the carton. In the event of carton damage or attachment missing in transit, please contact your dealer or
our after sales service department.
Technical specifications
1. Voltage: AC100-240V, 50Hz/60Hz, Fuse: 2A/250V
2. Rated Power: 100W
3. Laser diode: DPSS, green 532nm 100mW, red 650nm 300mW, blue 450nm 800mW
4. Laser power: 1000mW
5. Scanner:
20K high speed scanner
6. Control mode: sound control/auto/DMX/ ILDA
7. DMX channel: 19 channels
8. Dimensions: 340mm x 250mm x 150mm
9. Net weight: 4.5kg
10. Gross weight: 5.5kg
Warning
Do not expose the human eye direct to laser beam.
Do not turn on and off the unit frequently.
Before using this unit make sure the power supply is grounded.
This unit is intended for indoor use only and should be prevented from water, moisture and shakes. The
working temperature of this unit is 18-30°C, do not use this continuously over 4 hours, otherwise it shortens the
lifetime of the unit.
Use cleaning tissue to remove the dust absorbed on the external lenses periodically to optimize light output.
Do not remove or break the warranty label, otherwise it void the warranty.
Always replace with the exact same type fuse, replacement with anything other than the specified fuse can
cause fire or electric shock and damage your unit, and will void your manufactures warranty.
Function setting
When laser is powered on, LCD monitor on rear panel shows the current operating stand-alone mode or DMX
address of DMX mode. It is very easy to set and change the operating mode of the laser via the LCD control panel.
After every reset and saving, the new mode information will be shown on LCD monitor at next power on.
Mode Option, to choose the operating mode of laser
Confirmation, to store the current menu of confirm the current function
UP/DOWN, to change operating mode, parameter or DMX address
©Copyright Lotronic 2014
All manuals and user guides at all-guides.com
GB
LAS1000RGB-5IN1
3
Publicité
