Using The Alarms - SOUNDMASTER UR8600 Manuel

Setting alarms
The radio lets you have 2 alarm settings. To set the alarms:
In standby mode, press and hold the "ALARM 1" or "ALARM 2" button (6 or 7) until the alarm
time starts to flash.
• Setting alarm time: Press the ◄◄ (3) to set the hour time and ►► button (4) to set the
minute time.
Press the "ALARM 1" or "ALARM 2" button (6 or 7) to enter the alarm source mode.
• Setting alarm sound source: Press the ◄◄ or ►► button (3 or 4) to select the alarm or
radio as the alarm sound source. The corresponding alarm indicator will turn on according to
your selection.
Press the "ALARM 1" or "ALARM 2" button (6 or 7) to enter the alarm frequency mode.
• Setting alarm frequency: Press the ◄◄ or ►► button (3 or 4) to select an alarm
frequency (1-5 = Monday to Friday, 1-7 = Everyday, 6-7 = Weekend only).
Press "ALARM 1" or "ALARM 2" button (6 or 7) again for store and activating the alarm function,
the corresponding alarm indicator (alarm or radio) is switched on.
Turning the alarms on or off
When the clock time is displayed, press the "ALARM 1" or "ALARM 2" button (6 or 7) to enable
or disable the respective alarm. The corresponding Alarm 1 or Alarm 2 indicator (alarm or radio)
will switch on when the alarm is enabled.
Deactivating a sounding alarm
• Press any "ALARM OFF" button (6, 7 or 8) to switch off a sounding alarm.
• When the alarm sounds, the corresponding Alarm 1 or Alarm 2 indicator (alarm or radio)
flashes on the display.
• The Alarm function is still active and the signal will appear at the next set alarm time.
Snooze
• To temporarily silence a sounding alarm, press the "SNOOZE" button (9). The alarm will
sound again when the snooze period (9 minutes) is over.
• The corresponding Alarm 1 or Alarm 2 indicator (alarm or radio) flashes on the display
during the snooze period.
• To cancel the snooze period and the alarm, press any "ALARM OFF" button (6, 7 or 8).
Sleep
• This sleep function defines the duration of time before the radio switches itself off
automatically.
• When the radio is switched on, press the "SLEEP" button (2) repeatedly to select a sleep
period (Options: Off, 10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes).
• The radio will automatically switch off when the sleep period is over.
• Press the "SLEEP" button (2) to check the remaining time before the radio switches off.
• Press the "POWER" button (8) to cancel this function.

USING THE ALARMS

3
UR8600 / English Instruction Manual