Taking A Measurement; Power Off - Oregon Scientific BPU321OS Mode D'emploi

• Wait at least 3 minutes between measurements. This
allows your blood circulation to recover.
For a meaningful comparison, try to measure under
similar conditions. For example, take daily measurements
at approximately the same time, on the same arm, or as
directed by a physician.

TakINg a MEaSUREMENT

If you want the monitor to synchronize with the application
of your mobile device. Please do preparation before
starting a measurement.
1. Turn on the application and ensure the Bluetooth
connection on your smart device is good.
2. Relax your arm.
3. Press to turn on the unit.
4. Select user, then a voice prompts you to sit in the
correct position and to remain still :
Button User
Guest No records stored
1 Record stored under User 1
2 Record stored under User 2
5. Arm cuff will begin inflating automatically. Digits will
appear on the screen.
6. Once the pressure reaches a certain level, it will slowly
deflate until the results are displayed on the LCD.
7. The monitor automatically attempts to send the
record wirelessly to your mobile device. If data
transmission successes, bLE will display on the top
of the monitor screen.
BPU321OS_UM_EN_R20.indd 7
Memory
7
8. To conserve battery life, monitor will turn off 1 minute
after taking a measurement. Alternatively, press to
manually turn off monitor.
Please sanitize the monitor and main accessories
NOTE
for avoid cross infection.

POWER OFF

To stop the measurement process at any time, press .
UNDERSTaNDINg THE REaDINg
For reference material, please refer to Useful Reference
section which can be found at the end of this manual.
DISPLaY
Example:
1
2
3
4
5
1. Date / Time stamp (automatically toggles)
2. User selected
3. Systolic pressure
6
7
13-12-5 1:46