Oregon Scientific BPU321OS Mode D'emploi page 20

NOTE At 80 MHz and 800 MHz, the higher frequency
range applies.
NOTE These guidelines may not apply in all situations.
Electromagnetic is affected by absorption and reflection
from structures, objects and people.
a Field strengths from fixed transmitters, such as base
stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast
and TV broadcast cannot be predicted theoretically with
accuracy. To assess the electromagnetic environment
due to fixed RF transmitters, an electromagnetic site
survey should be considered. If the measured field
strength in the location in which the BPU321OS Blood
Pressure Monitor is used exceeds the applicable RF
compliance level above, the BPU321OS Blood Pressure
Monitor should be observed to verify normal operation. If
abnormal performance is observed, additional measures
may be necessary, such as re o rienting or relocating the
BPU321OS Blood Pressure Monitor .
b Over the frequency range 150 kHz to 80 MHz, field
strengths should be less than 3V/m.
BPU321OS_UM_EN_R20.indd 20
TaBLE 4: RECOMMENDED SEPaRaTION
DISTaNCES BETWEEN PORTaBLE aND MOBILE
RF COMMUNICaTIONS EQUIPMENT
aND THE EQUIPMENT OR SYSTEM -
FOR EQUIPMENT aND SYSTEMS
THaT aRE NOT LIFE-SUPPORTINg
Recommended separation distances between
portable and mobile RF communications equipment
and the BPU321OS Blood Pressure Monitor
The BPU321OS Blood Pressure Monitor is intended for
use in an electromagnetic environment in which radiated
RF disturbances are controlled. The customer or the
user of the BPU321OS Blood Pressure Monitor can help
prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile
RF communications equipment (transmitters) and the
BPU321OS Blood Pressure Monitor as recommended
below, according to the maximum output power of the
communications equipment
20
13-12-5 1:46