Oregon Scientific BPU321OS Mode D'emploi page 16

Dimensions
Dimensions 148 x 103 x 75 mm
L x W x H (5.8 x 4.1 x 3.0 in)
Weight 450g
Cuff circumference 22-32 cm
Transmission range 6 meters (19.7 feet)
Measuring range
30 to 280 mmHg
Pressure
(4.0 to 37.3 kPa)
Pulse 40 to 199 pulse/min
Power
4 x UM-3 (AA) 1.5V batteries
Power supply 6V adaptor (separate
purchase required)
Auto power off after 1 minute
Power save of no key press or after
synchronisation attempt
Operating environment
10°C to 40°C
Operation
(50°F to 104°F)
-20°C to 60°C
Storage
(-4°F to 140°F)
Humidity 10% to 83% relative humidity
BPU321OS_UM_EN_R20.indd 16
ELECTROMagNETIC COMPaTIBILITY
DESCRIPTIONS
TaBLE1: gUIDaNCE aND MaNUFaCTURER'S
DECLaRaTION – ELECTROMagNETIC EMISSION –
FOR aLL EQUIPMENT aND SYSTEMS
guidance and manufacturer's declaration –
1
electromagnetic emission
The BPU321OS Blood Pressure Monitor is intended
for use in the electromagnetic environment specified
2 below. The customer or the user of BPU321OS
Blood Pressure Monitor should assure that it is used
in such an environment.
3 Emissions test Compliance
RF emissions
4 Group 1
CISPR 11
16
Electromagnetic
environment - guidance
The BPU321OS Blood
Pressure Monitor uses
RF energy only for
its internal function.
Therefore, its RF
emissions are very low
and are not likely to
cause any interference
in nearby electronic
equipment.
13-12-5 1:46