Oregon Scientific BPU321OS Mode D'emploi page 11

Start data transmission:
For added convenience, the unit is programmed to send
data automatically:
• At the same time as taking measurement
• After taking measurement and unit detects there is
data which was not sent successfully.
Read a measurement on the app:
1. In User screen, select a user.
2. The screen simultaneously displays
the measuring value exactly the
same as your blood pressure
monitor. Connecting... and icon
appears and flashes on the screen.
3. Once the connection is done, the
icon stops flashing and BLE
Done displays on the screen of the
monitor. You can start measurement
and the record is automatically
saved to the application.
4. Swipe the screen to right; you
can view your measurement in
graph view. Rotate the screen to be
horizontal, and then you can review
the data history in bar view.
NOTE
• If the icon disappears that means the connection is
not successful.
• If there is an error during the Bluetooth connection, animated
BLE Err displays on the top of the monitor screen.
Manually send data:
1. Select a desired data history from user 1
BPU321OS_UM_EN_R20.indd 11
2. Press and hold
3. The screen display will turn off once synchronization
attempt (whether successful or not) has been
completed in a minute. Synchronizing status indicator
light (located above the top right corner of the screen)
varies as shown below:
Description
Flashing green
Continuous red
IMPORTANT
any function. Try to press the button in a minute.
REVIEW THE RECORDS
or user 2 .
11
and at the same time.
Successful
Unsuccessful
transmission
transmission
Meaning
Communicating
No connectivity
During transmission, pressing does not have
You can view the records from the
application by tapping .
1. You can view the records by List
View or Calendar View.
2. Once you view the exact data history,
you will view your measurement in
graph view. Rotate the screen to be
horizontal, and then you can review
the data history in bar view.
13-12-5 1:46