Batteries Replacement - BST UDR-110 Manuel D'utilisation

UDR-110
To change frequency display :
- Press ( and hold ) the SET button. LCD display shows « DISPLAY ».
- After 2 or 3 seconds, Display shows FYE 9u ( for frequency), either CHAnnl ( for channel ).
- Presse Up & Down to choose between two modes.
- Display flashes
- Press SET button to validate.
LOCK FUNCTION

BATTERIES REPLACEMENT

Press ( and hold ) the power switch during 3 to 5 seconds to switch the transmitter off.
-
- Pull out the clip ( like on the drawing )
- Unsrew batteries cover
Insert 2pcs AA 1.5B batteries
-
© Copyright LOTRONIC 2012
All manuals and user guides at all-guides.com
Press SET button. Display shows « LOC SET »
-
Display shows either « LOC ON » either « LOC OFF ». ( LOCK ON means the
-
receiver is blocked on one frequency. No change is possible and you cannot
switch the receiver off ).
Use Up & Down to select either LOC ON, either LOC OFF..
-
Presse SET button to validate
-
WWW.BSTDJ.COM
Page 14